What You Need to Know About Kovaria’s FootRevive

Kovaria’s FootRevive™ is a flexible red and near-infrared light therapy device designed specifically for the feet. Its flexible design allows the device to conform comfortably around the foot area while delivering targeted light therapy.

FootRevive uses 660 nm red light and 850 nm near-infrared light delivered through 64 LED chips. It features five light modes, three intensity levels, and a rechargeable battery for convenient, cordless use.

🦶 What Is FootRevive Designed For?

FootRevive is designed to provide targeted red and near-infrared light therapy to the feet.

Red and near-infrared light therapy has been studied for its potential to support circulation, cellular energy production, and the body's natural recovery processes. FootRevive is intended to complement your regular wellness routine and support comfort and mobility.

Individual experiences may vary. FootRevive is not intended to diagnose, treat, cure, or prevent any disease.

💡 What Wavelengths Does FootRevive Use?

FootRevive uses two wavelengths:

  • 660 nm Red Light – visible red light commonly used in light-based wellness applications.
  • 850 nm Near-Infrared Light – invisible near-infrared light that can penetrate deeper than visible red light.

The two wavelengths work together to provide targeted light therapy to the treatment area.

🔆 How Many LED Chips Does FootRevive Have?

FootRevive contains 64 LED chips designed to distribute red and near-infrared light across the foot area.

🔆 What Light Modes Does FootRevive Have?

FootRevive features 5 light modes. You can select the mode by pressing the flame button:

1. Low

Provides a lower light intensity for a gentler session.

2. Medium

Provides a moderate light intensity.

3. High

Provides a higher light intensity.

4. 10 Hz Pulse

The light pulses at a frequency of 10 Hz.

5. Breathing Mode

The light intensity gradually rises and falls in a repeating pattern.

The pulse and breathing settings change the way the light is delivered; they do not represent different wavelengths. FootRevive continues to use its red and near-infrared light during these modes.

⏱️ How Long Should I Use FootRevive?

FootRevive allows you to select either a 10-minute or 20-minute automatic shut-off timer.

Press the wave button to select your preferred session duration:

  • 10 minutes
  • 20 minutes

For general use, follow the recommended session duration and the instructions provided with your device.

🔋 How Long Does the Battery Last?

FootRevive has a 3000 mAh rechargeable battery.

  • Charging time: Approximately 2 hours
  • Usage per charge: Approximately 4–5 sessions
  • Session duration: 10 or 20 minutes per session
  • Battery: 3000 mAh
  • Power: 5 V / 2 A

Actual battery life may vary depending on the selected mode, intensity level, session duration, and other usage conditions.

📐 What Are the Dimensions and Weight?

  • Dimensions: 52.3 × 35.6 cm
  • Weight: Approximately 0.67 kg

Its flexible construction is designed to make positioning around the foot more convenient.

📊 What Is the Irradiance of FootRevive?

The measured irradiance at the foot skin surface is:

  • 660 nm: 17.87 mW/cm²
  • 850 nm: 14.19 mW/cm²
  • Combined multi-wavelength: 32.05 mW/cm²

Irradiance describes the amount of optical power delivered over a given area.

⚡ How Much Energy Does FootRevive Deliver?

For a 15-minute session, the stated energy density is:

  • 660 nm: 16.08 J/cm²
  • 850 nm: 12.77 J/cm²
  • Combined multi-wavelength: 28.85 J/cm²

These figures describe the light energy delivered over the treatment area during the specified session duration.

Note: FootRevive's available automatic timer settings are 10 or 20 minutes. The 15-minute energy-density figures above are provided as a reference measurement and do not represent a selectable timer setting.

🌡️ Does FootRevive Produce Heat?

FootRevive is designed to provide red and near-infrared light therapy rather than heat therapy.

You may notice some mild warmth during a session, but you do not need to feel heat for the device to be operating properly.

If the device becomes unusually hot or uncomfortable, discontinue use and allow it to cool.

🧘 Can I Use FootRevive While Sitting or Relaxing?

Yes. FootRevive is designed to provide hands-free light therapy to the feet, allowing you to use it while sitting and relaxing.

For safety and comfort, make sure the device is positioned securely and that you can easily access the controller.

🦶 Can I Use FootRevive on Other Parts of the Body?

FootRevive is specifically designed for the feet. For other areas of the body, we recommend using a Kovaria device designed for that particular treatment area.

📅 How Often Can I Use FootRevive?

FootRevive can be incorporated into a regular wellness routine. Follow the recommended session duration and allow your body to adjust to the device.

There is no guaranteed timeframe for experiencing noticeable results, and individual experiences can vary.

🧼 How Should I Clean FootRevive?

Keep the device clean and dry.

Because FootRevive contains electronic components and LED lights:

  • Do not immerse the device in water.
  • Do not place it under running water.
  • Wipe the surface gently with a suitable soft, slightly damp cloth when needed.
  • Allow the device to dry completely before use or charging.
  • Store it in a cool, dry location away from excessive heat and direct sunlight.

🔌 Can I Use FootRevive While It Is Charging?

For safety and proper operation, use FootRevive according to the charging and operating instructions provided with your device. Allow the device to charge fully before beginning a session if required by the device instructions.

The device won’t turn on while it’s plugged in, so unplug it before testing. Then press and hold the power button on the side. A short press won’t start it.

🔬 Independent Third-Party Testing

FootRevive has undergone independent third-party laboratory testing to verify key aspects of the device, including photobiological safety, electromagnetic compatibility, restricted substances, and LED wavelength accuracy.

The testing includes:

  • Photobiological Safety (EN 62471:2008): FootRevive’s LED emitters were classified as Exempt Group, indicating that the tested LED emitters met the standard’s Exempt Group criteria for photobiological safety.
  • Wavelength Verification: Independent spectral analysis measured the LED peaks at 656.6 nm for red light and 849.8 nm for near-infrared light, corresponding to the device's nominal 660 nm and 850 nm wavelengths.
  • FCC Compliance: The device was tested for electromagnetic emissions under FCC Part 15 Subpart B and was found conforming.
  • CE Electromagnetic Compatibility: Testing was performed against applicable EMC standards, with the device found conforming.
  • RoHS Compliance: Testing confirmed conformity with applicable restrictions on certain hazardous substances.

The testing was conducted by independent laboratories, including Centre Testing International Group Co., Ltd., Shenzhen LH Testing Technology Co., Ltd., and EVERFINE Spectral Analysis. The results apply to the tested FootRevive model and sampled units/components.

View the complete testing reports and verification details:
FootRevive Third-Party Test Results

These test results provide information about the device's tested safety, compliance, and technical characteristics. They should not be interpreted as a guarantee of individual health outcomes or treatment effectiveness.

⚠️ Important Safety Information

Use FootRevive only as directed.

Do not use the device over broken, irritated, or damaged skin unless advised by a healthcare professional.

Stop using the device if you experience unusual discomfort, excessive warmth, or skin irritation.

If you are pregnant, have a medical condition, have an implanted electronic medical device, or are under medical supervision, consult your healthcare professional before using red or near-infrared light therapy.



Check the Product Manual here.

You can get the device here.

Still need help

Can't find what you're looking for? Reach out and we'll sort it

Help center powered by Commslayer